Product introduction：

The fluid bed dryer is a material from the feed inlet into the machine, under the action of vibration force, the material along the horizontal fluidized bed, continuous forward movement, hot air through the fluidized bed upward with the wet material heat exchange, the wet air after the cyclone separator dust is discharged by the exhaust 1:3, dry material is discharged from the discharge inlet. It is suitable for drying and cooling of powder and granular materials in chemical, pharmaceutical, food, dehydrated vegetables, grain, mineral and other industries.

Technical parameter：

Working principle：

The material enters the machine from the feed inlet. Under the action of vibration force, the material is thrown along the horizontal fluidized bed and moves forward continuously. After the hot air passes upward through the fluidized bed to exchange heat with the wet material, the wet air is removed by the exhaust air 1:3 and the dry material is discharged from the discharge inlet.

Product characteristics：

●  Vibration source is driven by vibration motor, smooth running, easy maintenance, low noise, long life.

●  Fluidization symmetry, no dead space and blow through phenomenon, can obtain uniform drying, cooling products.

●  Good adjustability, wide application surface, material layer thickness, moving speed in the machine and full amplitude change can be stepless adjustment.

●  The damage to the surface of the material is small, can be used for the drying of fragile materials, and the work effect will not be affected when the material particles are irregular.

●  The fully enclosed structure reduces the cross infection between the material and the air, and the working environment is clean.

●  High mechanical efficiency and thermal efficiency, good energy saving effect, energy saving 30%-60% than the general drying device.